We were able to measure the distance for you from the top mounting holes to the top of the very top of the Curt RV Bumper Hitch # C19101.
As you can see by the accompanying diagram, the distance from the bottom of those mounting holes to the top of the hitch measures 1-1/8 inch so you will have enough clearance for the hitch to be installed without any interference.
I have added a link below to a video review for you to check out as well of the Curt RV Bumper Hitch # C19101. view full answer...
A weight distribution system will be the best option we can offer to help improve stability while towing. These systems not only help better distribute the weight of the trailer across the vehicle so you don't have issues with braking or body roll but they also help keep the trailer in a straight line. The one I recommend for a Forest River Cherokee Grey Wolf 26DBH is the Curt TruTrack Weight Distribution System part # C17500 which has both weight distributing properties and sway control.... view full answer...
The correct way to select the right Blue Ox SwayPro Weight Distribution is based on the tongue weight of the loaded trailer plus any gear behind the rear axle in the tow vehicle. The two dot bars part # BXW4006 are rated for up to 750 lbs, the three dot bars part # BXW4007 are rated for up to 1,000 lbs and the four dot bars part # BXW4008 are rated up to 1,500 lbs.
It's best to be just a bit under the weight capacity but so long as you are not exceeding this you'll be fine. view full answer...
Go To Results